IDOBAO Montex Pad
Firmware
(All VIA enabled.)
| Variant | Identifying Features | Firmware HEX file1 |
QMK Config2 | Source Location |
|---|---|---|---|---|
| Montex | 4x Underglow RGB, white only per-key LED’s | montex_via.hex |
idobao/montex/v1 |
QMK |
| Montex RGB | 4x Underglow RGB, 27x per-key RGB (Sold before April 2022) | montex_v1rgb_via.0.12.12.hex |
idobao/montex/v1rgb |
QMK |
| Montex RGB V2 | 4x Underglow RGB, 27x per-key RGB, “V2” PCB designator (Sold on or after April 2022) | montex_v2_via.0.16.9.hex or montex_v2_via_nug.0.16.9.hex3 |
idobao/montex/v2 |
QMK |
1 = Factory / As sold (VIA enabled)
2 = No VIA support
3 = “nug” is “No Under-Glow” variant, with disabled underglow LED’s for solid Alu bottom plate versions.